The following students are shortlisted for the personal interview which to be held 18.2.2019 at KIIT, Bhubaneswar. ELECTRICAL - Jagat Jyoti Dash Kajal Maharana Abhishek Biswal Jay Krishna Patel MECHANICAL - Lalit Kumar Yadav Pranav Kumar Sahoo Harsh Verma Kalinga Bismaya Rout Process - Personal Interview VENUE - Conference Hall - 8, Campus - 6, KIIT , Bhubaneswar-24 Reporting Time - 9.00 AM Date - 18th Feb 2019. Bring with all original documents with a set of self attested photocopies and recent passport size colour photographs and ID proof.

To conduct the pool campus drives by Essar Steel Ltd, Gujarat, at UGIE, Rourkela on 18 & 19 February 2019. Time:- O9.00AM 2019 passing out Diploma Engineers from Metallurgy, Mechanical and Chemical branch for Male candidates only. The candidates selected in the campus, would have the opportunity of rigorous training of four years where they would be trained for various jobs of operation and maintenance in various process plants of Essar group. During the training period, following emoluments and facilities would be admissible: 1. Stipend: Rs. 12,000/- pm for first two years, Rs. 15,000/-pm for next two years 2. Free Bachelor’s furnished hostel accommodation on sharing basis. 3. Life insurance coverage of Rs. 5.00 lakh 4. Medical and Health Insurance of Rs. 1.50 lakh Find below the eligibility criteria for the campus selection 1. Personality should be robust, smart and physically active 2. At the time of joining, Diploma should have been cleared with no backlog of ATKTs/Backlogs/Arrears 3. Age limit is 18 years minimum to 22 years maximum as on 1st May, 2019 i.e. should have been born between 1st May 1997 and 1st May 2001. Candidate should not have the below mentioned illustrative list enlisted physical disability or other weaknesses, as 1. Limping back 2. Extremely poor eye sight 3. Cannot walk straight 4. Hard on hearing 5. Stammering voice 6. Absent mindedness 7. Color Blindness- Partial or Total

JSPL Interview for 2017/2018 BATCH Metallurgy JSPL, Angul is planning to recruit pass out batch of Diploma Engineers in Metallurgy Stream. Hence eligible students are directed to send their resume by 10 AM tomorrow for onward transmission to JSPL Angul. Eligibility Criteria- 1. 2017 / 2018 Batch Pass out in Metallurgy Stream 2. Good Academic Record (60% and above marks through-out i.e. 10th & Diploma) 3. No current backlog 4. Good Communication Skills Students already appeared Written Test/ interview earlier at JSPL will not be allowed to participate in the test. EMAIL ID- subhasinijena@rediffmail.com

The following students are appeared for the written test and personal interview which to be held on 15.2.19 at JSPL, Anugul. Mechanical - Deepak Kumar Barik Joshabanta Sahu Debananda Kispotta Rahu Chirmako SOUMYA RANJAN SWAIN SIBANANDA SAHOO Date:- 15-02-2019 Time:- 09:00 am Venue:- Engineers Hostel 3 Jindal Steel & Power Limited Chhendipada Road Village- Nisha: State Highway (SH)- 63 Angul (Odisha)- 759122 i) Passport size photograph (2 No’s). ii) Proof of educational qualification / Copy of Mark-sheets (Original documents plus photocopy of the documents) iii) Filled in enclosed Bio-Data Form.

Interested students (2nd year Mechanical, Metallurgy, Electrical, Electronics, Chemical, Ceramic branches ) give your names and course for Tata Steel Registration by 15th February for onward transmission to the company. Program Details: The digital awareness programs covers the following courses of approx. duration 6 hrs: Basic Foundation Course 1(basics of digital) Basic Foundation Course 2(IoT) Basic Foundation Course 3(RPA, Social, Mobility, Analytics, Cloud, Cryptocurrency) The English Module covers 15 certifications with duration of approx. 160 hrs. Course Fees(inclusive of taxes) : Digital Industry 4.0 - Rs 2950. English - Rs 1550.

M/s. Tata Project interview scheduled on - 14.02.2019 at Hoogly (Kolkata) stands postponed. The revised date will be intimated later.

JSPL INTERVIEW FOR 2017/2018 BATCH MECHANICAL 31-01-2019 JSPL, Angul is planning to recruit pass out batch of Diploma Engineers in Mechanical Stream. Hence eligible students are directed to send their resume by 5 PM today for onward transmission to JSPL Angul. Eligibility Criteria- 1. 2017 / 2018 Batch Pass out in Mechanical Stream 2. Good Academic Record (60% and above marks through-out i.e. 10th & Diploma) 3. No current backlog 4. Good Communication Skills Students already appeared Written Test/ interview earlier at JSPL will not be allowed to participate in the test.

Careerpro is organising pool campus drive for John Deer, Owens Corning, CEAT TYRE for Diploma students of 2018/2019 batch. Eligible Criteria: Company : John Deer Branch : Mechanical and Automobile Y.O.P : 2018 / 2019 Diploma % : 55% with no backlog Salary : 11,000 /- Company : Owens Corning Branch : Mechanical, Automobile and Chemical Y.O.P : 2018 / 2019 Diploma % : 60% with no backlog Salary : 17,500 /- Company : CEAT TYRE Branch : Mechanical, Electrical and Electronics Y.O.P : 2018 / 2019 Diploma % : 50% with no backlog Salary : 10,500 /- Eligible students to register themselves on/before 16th Feb 2019 http://www.kareerpro.com/kareerform.php

The following student is shortlisted (after the written test) by TATA Projects Ltd to appear for Personal Interview (PI) at Hoogly. CIVIL- Mahima Purty Details of PI are as under: Date of Interview – 14.02.2019 (Thursday). Place of Interview – Technique Polytechnic Institute, PO - Sugandhya, District - Hooghly, West Bengal. Contact person– Mr. Suman Sikdar, Placement Officer, Technique Polytechnic Institute (Contact No: +91 9230088890 / 7980879976 / 7980160566). Time of Reporting at the Venue – 08.30 AM (Process of selection shall continue throughout the day. Students must come prepared to stay till evening). There is no reimbursement of travel expenses for attending the Personal Interview at Hoogly . The student should also submit the following at the time of personnel interview, without fail. a) Copy of latest CV. b) Copy of Aadhar Card / Pan card (ID Proof), c) Copy of 10th Marks Sheet, (Copy of 12th Marks Sheet if applicable ) , and d) Copy of mark sheets of Diploma upto previous semester.

Auction of condemned tools and equipments will be done on 8.2.2019.For details visit the attached website.

View the attached file for Quotation Call Notice. Last date for submission of Quotation- 10.9.2018

The following students are selected by the recruitment Drive of Royal Infield Ltd which was held on 31st July, 2018 at DRIEMS Campus. MECHANICAL- SANGITA TOPPO SONY MINZ ALKHEN TOPPO ELECTRICAL- PURNIMA NAG ETC- SANGHAMITRA MALLIK The Date of joining is 6th August, 2018. COMPANY ADDRESS:- (After 15 day Training) ROYAL INFIELD (A UNIT OF EICHER MOTORS LIMITED) PLOT# A-19/1, SIPCOT INDUSTRIAL GROWTH CENTRE, ORAGADAM VILLAGE, KANCHEEPURAM DISTRICT, TAMILNADU-602105. DOCUMENTS MUST CARRY AT THE TIME OF JOINING:- 1- Latest Resume 2-All certificates xerox copy (2 set) 3- 10 Nos. Passport size colour photo 4- 8 nos. Stamp size colour photo 5- ID Proof:- Aadhar Card/Pan Card/Voter id/DL etc. (Original) 6-Cash for 1 Month (House Rent, Mess charge etc.) 7- Savings passbook with ATM Card 1ST 15 DAYS TRAINING CENTER ADDRESS:- (i.e 6TH AUG TO 22ND AUG) TVS TRAINING & SERVICES, # 7/9A, MTH ROAD, AMBATTUR INDUSTRIAL ESTATE, CHENNAI. LAND MARK- OPP. to Ambattur Govt. I.T.I/Kochhar Apartment. ROUTE :- From Chennai central railway station catch Bus No- 7E & get down at Ambattur Industrial Esate Bus stop.From that Bus stop walk towards BSNL telephone exchange Office. Near Indian Oil Petrol bunk take left. NOTE:- 1st book your Train tickets to Chennai Central then send the scan copy.Company will provide Bus facility from Chennai Central to Training Center.